Organic Pollutants Research Articles

Synthesis of highly luminescent core-shell nanoprobes in a single pot for ofloxacin detection in blood serum and water.

Antibiotics are commonly used as antibacterial medications due to their extensive and potent therapeutic properties. However, the overconsumption of these chemicals leads to their accumulation in the human body via the food chain, amplifying drug resistance and compromising immunity, thus presenting a significant hazard to human health. Antibiotics are classified as organic pollutants. Therefore, it is crucial to conduct research on precise methodologies for detecting antibiotics in many substances, including food, pharmaceutical waste, and biological samples like serum and urine. The methodology described in this research paper introduces an innovative technique for producing nanoparticles using silica as the shell material, iron oxide as the core material, and carbon as the shell dopant. By integrating a carbon-doped silica shell, this substance acquires exceptional fluorescence characteristics and a substantial quantum yield value of 80%. By capitalising on this characteristic of the substance, we have effectively constructed a fluorescent sensor that enables accurate ofloxacin analysis, with a detection limit of 1.3 × 10-6 M and a linear range of concentrations from 0 to 120 × 10-6 M. We also evaluated the potential of CSIONPs for OLF detection in blood serum and tap water analysis. The obtained relative standard deviation values were below 3.5%. The percentage of ofloxacin recovery from blood serum ranged from 95.52% to 103.28%, and from 89.9% to 96.0% from tap water.

Epoxiconazole degradation in water samples: a comparative study of Fenton, photo-Fenton, solar photo-Fenton, and solar photolysis processes.

Epoxiconazole (EPO) is classified as a persistent organic pollutant due to its ability to persist in the environment for prolonged periods. Its degradation is pivotal in mitigating its environmental impact. This investigation focuses on assessing the degradation of EPO using various methodologies, namely Fenton, photo-Fenton, solar photo-Fenton, and solar photolysis, conducted in both Milli-Q water and groundwater. These experiments encompassed evaluations at both the standard pH typically used in photo-Fenton reactions and the natural pH levels inherent to the respective aqueous environments. Additionally, EPO degradation products were analyzed after a 60-min reaction. Notably, in systems utilizing groundwater, the inclusion of additional iron was unnecessary, as the naturally occurring iron content in the groundwater facilitated the intended processes. Specifically, in Milli-Q water, solar photo-Fenton demonstrated an EPO degradation efficiency of 97%. Furthermore, the substitution of Milli-Q water with groundwater in Fenton-like processes did not significantly affect the efficacy of EPO degradation. These findings underscore the potential of solar photo-Fenton as an economically viable and environmentally sustainable strategy for EPO degradation.

Advances in the Removal of Organic Pollutants from Water by Photocatalytic Activation of Persulfate: Photocatalyst Modification Strategy and Reaction Mechanism.

Environmental pollution caused by persistent organic pollutants has imposed big threats to the health of human and ecological systems. The development of efficient methods to effectively degrade and remove these persistent organic pollutants is therefore of paramount importance. Photocatalytic persulfate-based advanced oxidation technologies (PS-AOTs), which depend on the highly reactive SO4·- radicals generated by the activation of PS to degrade persistent organic pollutants, have shown great promise. This work discusses the application and modification strategies of common photocatalysts in photocatalytic PS-AOTs, and compares the degradation performance of different catalysts for pollutants. Furthermore, essential elements impacting photocatalytic PS-AOTs are discussed, including the water matrix, reaction process mechanism, pollutant degradation pathway, singlet oxygen generation, and potential PS hazards. Finally, the existing issues and future challenges of photocatalytic PS-AOTs are summarized and prospected to encourage their practical application. In particular, by providing new insights into the PS-AOTs, this review sheds light on the opportunities and challenges for the development of photocatalysts with advanced features for the PS-AOTs, which will be of great interests to promote better fundamental understanding of the PS-AOTs and their practical applications.

N-doped TiO2 for photocatalytic degradation of colorless and colored organic pollutants under visible light irradiation

N-doped TiO2 for photocatalytic degradation of colorless and colored organic pollutants under visible light irradiation

Preparation of a New and Effective Heterogeneous Catalyst for Treatment of Organic Pollutant Using Fenton Process

Preparation of a New and Effective Heterogeneous Catalyst for Treatment of Organic Pollutant Using Fenton Process

Photocatalytic application of nickel oxide/zinc oxide nanoparticles decorated kaolinite nanocomposite for the degradation of crystal violet

The photocatalysis process, which is effective, economical, and environmentally friendly can overcome rapidly increasing environmental problems, has shown rapid development in recent years. Nontoxic, low-cost natural minerals are often used in photocatalysis processes that remove organic pollution from wastewater. In this study, a selective method for the removal of crystal violet (CV) from aqueous solutions using nanocomposite of nickel oxide/zinc oxide nanoparticles (NiO/ZnO) supported on kaolinite photocatalyst was investigated. The raw kaolinite, bare NiO, bare ZnO and nanocomposite samples were characterized by the XRD, TEM, SEM-EDX, XPS and FTIR techniques. The photocatalytic performances of kaolinite-NiOZnO (K-NiO/ZnO) nanocomposite and bare samples were also investigated and comparatively evaluated by the photodegradation of CV (cationic dye) dye under visible light irradiation. The effects of various parameters such as the dosage of photocatalysis, contact time, and initial dye concentration on the rate of removal of dye were investigated and optimized. The kinetics of decolorization by samples can be well described by the pseudo-first-order model. Finally, it can be used in advanced oxidative processes for the degradation of organic pollutants.

A Review About the Occurrence and Effectiveness of Conventional and Advanced Treatment Technologies of Persistent Organic Pollutants in Surface Water

A Review About the Occurrence and Effectiveness of Conventional and Advanced Treatment Technologies of Persistent Organic Pollutants in Surface Water

The role of Au and Pd in photocatalytic activation of molecular oxygen: A mechanistic study

Activation of molecular oxygen plays an important role in photocatalytic selective oxidation reactions and complete degradation of organic pollutants. Noble metal cocatalysts are often employed to modulate the activation of oxygen to reach an optimum photocatalytic performance. However, the role of the metal nanoparticles (NPs) still remains unclear and deserves investigation for the design of efficient photocatalysts. Here, Au and Pd NPs are deposited on the TiO2 photocatalyst to study the promotional mechanism of O2 dissociation with the presence of glycerol under irradiation by near-ambient-pressure photoelectron spectroscopy and in-situ spectrometry approaches. While both Au and Pd NPs can dissociate O2 into activated oxygen species, a relatively strong bonds of dissociated oxygen atom is observed on Au NPs than on the Pd NPs. This results in a moderate reduction rate of O2 and eventually favors a mild oxidation reaction process for Au, and a rapid reduction rate of O2 and eventually a deep oxidation reaction process for Pd, respectively.

The Potential of AOP Pretreatment in the Biodegradation of PS and PVC Microplastics by Candida parapsilosis

Microplastics are an emerging class of recalcitrant organic pollutants that are of general scientific and public interest nowadays. It would be ideal to remove microplastics from the environment through biodegradation, as biodegradation is a highly ecological and economically acceptable approach. Unfortunately, the efficiency of biodegradation of conventional plastic polymers is low. The application of a suitable pretreatment could increase the efficiency of biodegradation. In this study, the applicability of UV-C/H2O2 and UV-C/S2O82− advanced oxidation processes as pretreatments for the biodegradation of polystyrene and poly(vinyl chloride) microplastics by the yeast Candida parapsilosis was investigated. For the investigated range (pH 4–10, peroxide concentration up to 20 mM and treatment duration up to 90 min), the UV-C/H2O2 process proved to be more effective in degrading polystyrene microplastics, while the UV-C/S2O82− process was more efficient at degrading poly(vinyl chloride) microplastics. Samples pretreated under optimal conditions (90 min treatment time at a pH of 5.7 and H2O2 concentration of 20.0 mM for polystyrene samples; 90 min treatment time at a pH of 8.6 and S2O82− concentration of 11.1 mM for poly(vinyl chloride) samples) were subjected to biodegradation by Candida parapsilosis. The biodegradation conditions included an agitation speed of 156 rpm and an initial pH of 5.7 for the experiments with the polystyrene samples, while an agitation speed of 136 rpm and an initial pH of 4.9 were used for the poly(vinyl chloride) experiments. The initial value of the optical density of the yeast suspension was 1.0 in both cases. The experiments showed a positive effect of the pretreatment on the number of yeast cells on the surface of the microplastics.

Facile hydrothermal synthesis of a multifunctional copper zinc tin sulfide (CZTS) nanoparticle-coated sepiolite fiber composite: structural characterization and photocatalytic properties

This work presents a facile hydrothermal synthesis method for fabricating a multifunctional composite of copper zinc tin sulfide (CZTS) nanoparticles coated onto sepiolite fibers. Morphological analysis confirms the firm attachment of approximately 10 nm CZTS nanoparticles onto the sepiolite surface. Elemental analysis verifies the presence of constituent elements from both CZTS and sepiolite, with a slight deficiency in Cu and an abundance of Zn observed. The compositional formula of CZTS in the composite is estimated as Cu1.93Zn1.05Sn0.98S4.04. Notably, the material exhibits a narrow band gap of 1.5 eV, enabling effective utilization of the entire visible light spectrum, making it promising for photocatalytic applications. BET nitrogen adsorption/desorption measurements reveal a substantial surface area of approximately 85.720 m2 /g, confirming the composite’s versatility and applicability, particularly in photocatalysis and adsorption processes. Additionally, X-ray diffraction analysis indicates reflections consistent with the crystal structures of kasterite CZTS and sepiolite, further confirming the composite’s composition. The multifunctional CZTS/Sepiolite composite demonstrates exceptional potential for simultaneous photocatalytic degradation and adsorption of organic pollutants, presenting a promising avenue for sustainable water treatment applications.

Degradation of Bisphenol A by Nitrogen-Rich ZIF-8-Derived Carbon Materials-Activated Peroxymonosulfate

Bisphenol A (BPA), representing a class of organic pollutants, finds extensive applications in the pharmaceutical industry. However, its widespread use poses a significant hazard to both ecosystem integrity and human health. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) via heterogeneous catalysts are frequently proposed for treating persistent pollutants. In this study, the degradation performance of BPA in an oxidation system of PMS activated by transition metal sites anchored nitrogen-doped carbonaceous substrate (M-N-C) materials was investigated. As heterogeneous catalysts targeting the activation of peroxymonosulfate (PMS), M-N-C materials emerge as promising contenders poised to overcome the limitations encountered with traditional carbon materials, which often exhibit insufficient activity in the PMS activation process. Nevertheless, the amalgamation of metal sites during the synthesis process presents a formidable challenge to the structural design of M-N-C. Herein, employing ZIF-8 as the precursor of carbonaceous support, metal ions can readily penetrate the cage structure of the substrate, and the N-rich linkers serve as effective ligands for anchoring metal cations, thereby overcoming the awkward limitation. The research results of this study indicate BPA in water matrix can be effectively removed in the M-N-C/PMS system, in which the obtained nitrogen-rich ZIF-8-derived Cu-N-C presented excellent activity and stability on the PMS activation, as well as the outstanding resistance towards the variation of environmental factors. Moreover, the biological toxicity of BPA and its degradation intermediates were investigated via the Toxicity Estimation Software Tool (T.E.S.T.) based on the ECOSAR system.

A Dangerous Couple: Sequential Effect of Phosphorus Flame-Retardant and Polyurethane Decrease Locomotor Activity in Planarian Girardia tigrina

Understanding the interplay among organophosphorus flame retardants (OPFRs), microplastics, and freshwater organisms is crucial for unravelling the dynamics within freshwater environments and foreseeing the potential impacts of organic pollutants and plastic contamination. For that purpose, the present research assessed the exposure impact of 10 mg L−1 flame-retardant aluminium diethylphosphinate (ALPI), 10 μg mg−1liver microplastics polyurethane (PU), and the combination of ALPI and PU on the freshwater planarian Girardia tigrina. The exposure to both ALPI and PU revealed a sequential effect, i.e., a decrease in locomotor activity, while oxidative stress biomarkers (total glutathione, catalase, glutathione S-transferase, lipid peroxidation) and metabolic responses (cholinesterase activity, electron transport system, and lactate dehydrogenase) remained unaffected. Despite this fact, it was possible to observe that the range of physiological responses in exposed organisms varied, in particular in the cases of the electron transport system, cholinesterase activity, glutathione S-transferase, catalase, and levels of total glutathione and proteins, showing that the energetic costs for detoxification and antioxidant capacity might be causing a lesser amount of energy allocated for the planarian activity. By examining the physiological, behavioural, and ecological responses of planarians to these pollutants, insights can be gained into broader ecosystem-level effects and inform strategies for mitigating environmental risks associated with OPFRs and microplastic pollution in freshwater environments.

Water Quality Assessment Using the Water Quality Index, and Geographic Information Systems in Nador Canal, Morocco

In recent decades, water pollution has emerged as a significant concern, posing a threat to both humans and natural ecosystems. This study aimed to assess the spatial variations in water quality in the Nador Canal, Morocco using the water quality index combined with multivariate statistical techniques and geographic information systems (GIS). The parameters examined were then compared to the maximum permissible limit values recommended by Moroccan surface water standards and the World Health Organization. The results indicated that the WQI of Nador Canal is generally suitable for irrigation and unsuitable for drinking. It indicated that the quality of surface water in the Nador Canal is affected by organic pollutants, and this is evidenced by low levels of dissolved oxygen, the levels of elements were high, especially chlorine and sodium, in addition to a high concentration of ammonia, nitrate, and phosphate in some of the stations studied. Principal component analysis (PCA) results revealed that PC1–PC3 collectively accounted for 73% of the variation in surface water quality within the study area. The cluster analysis also proves that the water quality is relatively polluted. Potential contributing factors to surface water pollution include changes in the hydrological regime, household waste discharges, and agricultural activities. These findings furnish essential insights into water quality, particularly its suitability for irrigation, and contribute to enhancing the water quality management system of the Nador Canal in the Gharb region of Morocco.

Enhancing volatile fatty acid production in batch test reactors by modulating microbial communities with potassium permanganate

The shift from conventional wastewater treatment plants to biorefineries is one of the most environmentally and economically sustainable pathways for extracting valuable compounds from waste. Besides chemical-physical processes, microorganisms within sewage sludge utilize organic and inorganic pollutants in the wastewater as nutrients, leading to effective water purification. However, the remaining solid sludge residue, typically destined for specific landfills or incineration, could undergo microbial fermentation to produce volatile fatty acids (VFA), metabolic precursors for biopolymers. Increasing attention has been directed towards optimizing operational parameters to enhance VFA production during sewage sludge fermentation. This study examined the impact of potassium permanganate (PP) on microbial communities during the sewage sludge's acidogenic fermentation. The results highlighted the positive effect of PP treatment, which increased COD production and VFA yield up to 1263.5 mg/L and 664.2 mg COD/L, respectively. The presence of PP significantly enhances VFA yield promoting bacteria positively linked to VFA production.

Accumulation of Long-Lived Photogenerated Holes at Indium Single Atom Catalysts via Two Coordinate Nitrogen Vacancy Defect Engineering for Enhanced Photocatalytic Oxidation.

Visible light-driven photocatalytic oxidation by photogenerated holes has immense potential for environmental remediation applications. While the electron-mediated photoreduction reactions are often at the spotlight, active holes possess a remarkable oxidation capacity that can degrade recalcitrant organic pollutants, resulting in non-toxic byproducts. However, the random charge transfer and rapid recombination of electron-hole pairs hinder the accumulation of long-lived holes at the reaction center. Herein, we report a novel method employing defect-engineered indium (In) single atom photocatalysts, dispersed in carbon nitride foam (In-Nv-CNF), to overcome these challenges and make further advances in photocatalysis. This Nv (nitrogen vacancy) defect-engineered strategy produces a remarkable extension in the lifetime of photogenerated holes and an increase in the concentration of photogenerated holes in In-Nv-CNF. Consequently, the optimized In-Nv-CNF demonstrates a remarkable 50-fold increase in photo-oxidative degradation rate compared to pristine CN, effectively breaking down two widely used antibiotics (tetracycline and ciprofloxacin) under visible light. The contaminated water treated by In-Nv-CNF has proven to be completely non-toxic based on the growth of E. coli before and after treatment. Structural-performance correlations between Nv defect engineering and long-lived hole accumulation in In-Nv-CNF are established and validated through experimental and theoretical agreement. This work has the potential to elevate the efficiency of overall photocatalytic reactions from a hole-centric standpoint. This article is protected by copyright. All rights reserved.

Metal–Organic Framework Fe-BTC as Heterogeneous Catalyst for Electro-Fenton Treatment of Tetracycline

This study explores the use of the iron-containing metal–organic framework (MOF), Basolite®F300, as a heterogeneous catalyst for electrochemically-driven Fenton processes. Electrochemical advanced oxidation processes (EAOPs) have shown promise on the abatement of recalcitrant organic pollutants such as pharmaceuticals. Tetracyclines (TC) are a frequently used class of antibiotics that are now polluting surface water and groundwater sources worldwide. Acknowledging the fast capability of EAOPs to treat persistent pharmaceutical pollutants, we propose an electrochemical Fenton treatment process that is catalyzed by the use of a commercially available MOF material to degrade TC. The efficiency of H2O2 generation in the IrO2/carbon felt setup is highlighted. However, electrochemical oxidation with H2O2 production (ECO-H2O2) alone is not enough to achieve complete TC removal, attributed to the formation of weak oxidant species. Incorporating Basolite®F300 in the heterogeneous electro-Fenton (HEF) process results in complete TC removal within 40 min, showcasing its efficacy. Additionally, this study explores the effect of varying MOF concentrations, indicating optimal removal rates at 100 mg L−1 due to a balance of kinetics and limitation of active sites of the catalysts. Furthermore, the impact of the applied current on TC removal is investigated, revealing a proportional relationship between current and removal rates. The analysis of energy efficiency emphasizes 50 mA as the optimal current, however, balancing removal efficiency with electrical energy consumption. This work highlights the potential of Basolite®F300 as an effective catalyst in the HEF process for pollutant abatement, providing valuable insights into optimizing electrified water treatment applications with MOF nanomaterials to treat organic pollutants.

Multi-metric biomonitoring of a seasonally flooded Baraila wetland using benthic macroinvertebrates as indicator organisms in the middle Ganga River Basin (Vaishali), India

ABSTRACT Human encroachment, urban and agricultural expansion, frequent droughts, eutrophication, infestation of weeds, and overexploitation of resources has predominantly impacted the water quality and biodiversity of the Baraila wetland. The present seasonal study has aimed to explore an under-researched subject of analyzing the water quality of the wetland through multi-metric biomonitoring approaches in 2022. A total of 24 water and benthic samples were collected from the four sampling locations. All the water parameters were within a suitable range to support diverse range of flora and fauna, except total suspended solids (TSS) and nutrient, indicating toward the impact of agricultural expansion in the wetland's area. Out of the 13 identified families of benthic macroinvertebrates, the semi-tolerant family of Viviparidae and Bithyniidae has dominated the wetland, with a relative abundance of 27.04 and 37.77%, respectively, in the comparative seasons. Moreover, the indices used in the study has categorized the wetland under moderately polluted condition. The Hierarchical Cluster Analysis (HCA) analysis has revealed the sensitivity toward organic pollution and habitat preferences has played major role in the species-specific assemblage of benthic community. The Mantel's correlogram further validates that the moderately polluted status of wetland has favored semi-tolerant to tolerant fauna in the wetland.

Degradation of organic mercury in high salt environments by a marine aerobic bacterium Alteromonas macleodii KD01

Mercury (Hg), particularly organic mercury, poses a global concern due to its pronounced toxicity and bioaccumulation. Bioremediation of organic mercury in high-salt wastewater faces challenges due to the growth limitations imposed by elevated Cl− and Na+ concentrations on microorganisms. In this study, an isolated marine bacterium Alteromonas macleodii KD01 was demonstrated to degrade methylmercury (MeHg) efficiently in seawater and then was applied to degrade organic mercury (MeHg, ethylmercury, and thimerosal) in simulated high-salt wastewater. Results showed that A. macleodii KD01 can rapidly degrade organic mercury (within 20 min) even at high concentrations (>10 ng/mL), volatilizing a portion of Hg from the wastewater. Further analysis revealed an increased transcription of organomercury lyase (merB) with rising organic mercury concentrations during the exposure process, suggesting the involvement of mer operon (merA and merB). These findings highlight A. macleodii KD01 as a promising candidate for addressing organic mercury pollution in high-salt wastewater.

Efficient Catalytic Elimination of Toxic Volatile Organic Compounds via Advanced Oxidation Process Wet Scrubbing with Bifunctional Cobalt Sulfide/Activated Carbon Catalysts.

Advanced oxidation process (AOP) wet scrubber is a powerful and clean technology for organic pollutant treatment but still presents great challenges in removing the highly toxic and hydrophobic volatile organic compounds (VOCs). Herein, we elaborately designed a bifunctional cobalt sulfide (CoS2)/activated carbon (AC) catalyst to activate peroxymonosulfate (PMS) for efficient toxic VOC removal in an AOP wet scrubber. By combining the excellent VOC adsorption capacity of AC with the highly efficient PMS activation activity of CoS2, CoS2/AC can rapidly capture VOCs from the gas phase to proceed with the SO4•- and HO• radical-induced oxidation reaction. More than 90% of aromatic VOCs were removed over a wide pH range (3-11) with low Co ion leaching (0.19 mg/L). The electron-rich sulfur vacancies and low-valence Co species were the main active sites for PMS activation. SO4•- was mainly responsible for the initial oxidation of VOCs, while HO• and O2 acted in the subsequent ring-opening and mineralization processes of intermediates. No gaseous intermediates from VOC oxidation were detected, and the highly toxic liquid intermediates like benzene were also greatly decreased, thus effectively reducing the health toxicity associated with byproduct emissions. This work provided a comprehensive understanding of the deep oxidation of VOCs via AOP wet scrubber, significantly accelerating its application in environmental remediation.

Characteristics of Fe/C catalysts based on pyrolysis of ferric citrate and its peroxymonosulfate activation performance to degrade sulfadiazine in water.

Advanced oxidation techniques based on peroxysulfate activation have been paid much attention owing to their excellent performance in degrading stubborn pollutants in water. In response to the current situation that requires more raw materials and higher costs and involves more complicated processes for the preparation of Fe/C catalysts to activate persulfates, novel catalysts (Fe/C-700, Fe/C-800, Fe/C-900 and Fe/C-1000) were prepared by a high-temperature carbonization method at different pyrolysis temperatures (700, 800, 900 and 1000 °C) using inexpensive and environmentally friendly ferric citrate as raw material. Fe/C catalysts were characterized using SEM, EDS, XRD, XPS, and VSM and were screened for the activation of peroxymonosulfate (PMS) to degrade sulfadiazine (SDZ) in water, where Fe/C-900 exhibited higher efficiency. Thus, its activation performance for PMS to degrade SDZ was comprehensively investigated and the mechanisms of activation degradation were analyzed. The results showed that the degradation rate of 98.7% can be achieved to 10 mg L-1 SDZ by 0.1 g L-1 Fe/C-900 and 0.5 mmol L-1 PMS within 60 min. A wide range of solution pH, low catalyst dosage and good recycling performance were found in the Fe/C-900 application and the amount of iron ions dissolved at the end of the reaction was low (0.350 mg L-1). It was shown that both free radical and non-free radical pathways existed in the reaction system, where 1O2, SO4-˙ and O2-˙ played dominant roles in the degradation process of SDZ. The results could provide new ideas for the preparation of Fe/C catalysts and their heterogeneous activation for PMS to degrade stubborn organic pollutants in water.